| |
FREQUENTLY ASKED QUESTIONS
How can the projector
receive a "Digital RGB" Signal?
- In order for the Projector to receive a "Digital RGB" signal from
the computer (DVI output), the computer and the projector need to be
connected via DVI-D to DVI-D Cable. This cable is an optional accessory
and can be purchased from PLUS Vision Corp. If the projectors "AUTO
Source" is set to ON (see Menu/Setup/Auto Source)the projector should
automatically detect the "Digital RGB" signal once the computer sends
the signal. If the "Auto Source" is set to off, then select DIGITAL
from the remote control or press the SOURCE button on the main unit
until "DIGITAL RGB" is selected.
Return to the beginning of Frequently Asked Questions.
|
|
|
