| |
TAXAN
DIGITAL PROJECTOR - Discontinued
|
|
High lumen installation
projector - Yet small enough to use table top.
|
|
BrilliantColor™
Unlike projectors using conventional DLP® technology which employs a
four-segment color wheel, the PH-1001X uses a six-segment color wheel
and takes full advantage of BrilliantColor™ technology from Texas Instruments®.
This broader color range enables far more realistic color reproduction,
especially in the yellow and light blue hues. |
 |
|
Variable Illumination
The PH-1001X offers a wide choice of software-based color
modes. Each mode is achieved by adjusting the illumination on different
segments of the color wheel. Users can choose the optimal color balance
to suit their projecting needs. Choose: Standard mode; Graphics mode;
Presentation mode; or Movie mode. In Presentation Mode, brightness
is enhanced by emphasizing RGB segments, while in "Graphics mode" the
Y and C segments are highlighted to emphasize color reproduction.
These and other color modes can be selected for different kinds
of presentation situations. |
 |
|
Networked Control
In order to be of more convenient use in the work environment, Taxan the PH-1001X
has both networking and remote control features. The RJ45 jack and wired LAN
functionality make it possible to perform a variety of operations indirectly,
including power on/off, brightness adjustment, contrast adjustment, video-source
and sound-mute, etc. |
 |
|
Multiple Interfaces for Extensive
Connectivity (See Terminals Below)
Input: DVI-I, mini D-sub 15-pin, HDMI, component, S-Video, composite
Output: Mini D-sub 15-pin, DC 12 V (screen trigger function)
Audio output (variable) are provided, allowing you to change the volume
of the external speakers by adjusting the projector’s volume level. |
|
Direct
power on/off
Turn the projector power on and off from the main power switch
The projector can be powered on (off) by plugging it into (unplugging
if from) an AC outlet. If the projector is suspended from the ceiling,
it can be powered on and off by using the associated circuit breaker
switch, rather than using a remote control. |
|
Linked screen trigger
function
Ideal for use with large motorized screens!
The screen trigger (DC12V) enables automatic raising and lowering of
a motorized screen when the projector is powered on and off. This is
ideal for venues with large motorized screens such as conference rooms.
(Note: Some motorized screens may not support the screen trigger function.) |
|
Wall Color Compensation
Ideal for indoor or outdoor use when no screen is available!
This function delivers color reproduction very similar to than projected
on a white surface, even when a colored wall or blackboard is used
in place of a screen. |
 |
|
Advanced features
utilizing Wired LAN (RJ45)
• Automatically receive projector status reports by e-mail!
This feature automatically sends a message to the preset e-mail address
when an event such as a burned out lamp or product failure occurs. Control
and manage the projector from a Web browser via a LAN link!
• The projector can be controlled and its operating status monitored remotely
using a standard Web browser running on a personal computer linked to
a LAN to which the projector is also connected. It is also possible to
manage multiple projector connected to a single network. This functionality
enables centralized control vial a network or using a control panel.
|
|
Easy lamp replacement
Lamp replacement is easy even in ceiling
mounted installations!
Since the lamp can be accessed from the top of the projector, anyone
can replace the lamp very easily, whether the projector is on a desktop
or mounted on the ceiling. |
 |
|
|
- BrilliantColor™
- High Lumens - 4200
- High contrast ratio of 2300:1
- Variable Illumination
- HDMI and other high-definition connections
- Wired LAN functions
|
| |
|
|
Terminals: |
|
|
| |
|
|
TOP |
|
|
